Ramwerte sind falsch wo kann ich das ändern

  • Antworten:13
Hans Klawun
  • Forum-Beiträge: 23

16.12.2016, 18:35:51 via Website

Guten Tag,

ich habe hier ein YONESTOPTECH Q102 Fiber_BS1078 mit angeblich 1 GB Ram und 32 GB Speicher liegen.

Es werden aber nur 768 MB Ram angezeigt ( Gesamt ) und was danach übrig bleibt.

Jetzt habe ich das Teil mal aufgeschraubt und sehen dort 2 x DDR3 Ram a´4 GB ( 2 mal NAYA 1314 NT5CB256M16BP )
Nachfrage beim Hersteller: bei dem Speicherchip handelt es sich um einen 4Gb DDR3 Chip 256x8 1333

Was ist das den ?

Die Data-Partition habe ich schon von 2 auf 8 GB geändert und funktioniert ohne Probleme.

Wo wird der/das verfügbare RAM konfiguriert ?

Danke Hans

Antworten
Haakon T.
  • Forum-Beiträge: 375

16.12.2016, 19:19:49 via Website

Hans Klawun

Nachfrage beim Hersteller: bei dem Speicherchip handelt es sich um einen 4Gb DDR3 Chip 256x8 1333

Was ist das den ?

Das sind 500MB. Passt also alles.

— geändert am 16.12.2016, 19:21:39

Antworten
Hans Klawun
  • Forum-Beiträge: 23

16.12.2016, 19:50:02 via Website

Wie 500 MB ?
weshalb wird das Teil dann mit 1 GB Ram angeboten und installiert sind nur 768 MB, davon nutzbar sind 708MB, Frei sind jetzt 413 MB.

Ich habe einen Link von NAYA bekommen: www.nanya.com/NanyaAdmin/GetFiles.ashx?ID=1109
da stehen die technischen Daten.
Ich habe mir schon gedacht, das anhand der Bezeichnung nur 2 x 256 MB verbaut sind.
Deswgen bin ich jetzt ein wenig durcheinander....wo kommt der Speicher her, der mir angezeigt wird aber eigentlich nicht möglich ist ?
Oder wie kommen die Chinesen auf 1 GB RAM.

Ich gehe davon aus, das eine Partition des internen Speichers als Ram deklariert wird....aber wo kann ich das ändern ?
in der sysconfig.lhs evtl ?

Danke Hans

Antworten
Haakon T.
  • Forum-Beiträge: 375

16.12.2016, 20:04:27 via Website

Du schriebst ja "einen 4Gb DDR3 Chip 256x8 1333". Da es derer zwei sind hat das Gerät also die 1GB, das ist der Hauptspeicher des Gerätes, abzüglich reservierter Videospeicher und etwas Kleinkram.

Antworten
Hans Klawun
  • Forum-Beiträge: 23

16.12.2016, 21:04:32 via Website

Meine anderen Geräte zeigen mir aber den komplett installiertenSpeicher an ....also 512 MB oder 3 GB oder...

Deswegen komme ich da ein wenig durcheinander.

Antworten
Shieldine
  • Forum-Beiträge: 4.468

16.12.2016, 21:48:57 via App

Brauchst du nicht. Einige Handys , die ich vorher hatte, zeigten mir auch nur den benutzbaren Speicher an. (Beispiel : mein altes Moto G)

— geändert am 16.12.2016, 21:50:17

Gruß


Motorola One - Android 10 (Stock)
Samsung Galaxy Tab 10.1N - AOSP 7.0

Antworten
Hans Klawun
  • Forum-Beiträge: 23

16.12.2016, 21:56:01 via Website

Ok, dann lass ich das mal so stehen und mache mir keine Gedanken mehr darüber ;)

Ich habe die Geräte sowieso nur zum "Lernen" und rumprobieren.

Danke Hans

Antworten
Haakon T.
  • Forum-Beiträge: 375

17.12.2016, 12:42:07 via Website

Ansonsten kannst du im Kernellog die Speichererkennung- und Verwaltung exakt nachvollziehen.

Antworten
Hans Klawun
  • Forum-Beiträge: 23

17.12.2016, 16:15:29 via Website

Ich hoffe es passt alles rein.
Evtl. kann das bitte jemand aufschlüsseln.

]zone->zone_start_phy_block->phy_block.Block_NO: 0
<4>[ 5.440025] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 2078
<4>[ 5.440038] [ND]zone->zone_phy_page_map_for_gc: e5de6000
<4>[ 5.440049] [ND]zone->current_block.phy_page_map: e5d8b000
<4>[ 5.440060] [ND]zone->current_block.block_info: e5d4258c
<4>[ 5.440072] [ND]zone->current_block.block_info->phy_block.Block_NO: 267
<4>[ 5.440084] [ND]zone->current_block.page_used: 154
<4>[ 5.440095] [ND]zone->current_block.block_info->block_used_count: 1811
<4>[ 5.440107] [ND]zone->temp_page_buf: e5e48000
<4>[ 5.440118] [ND]zone->max_erase_num: 1
<4>[ 5.440127] [ND]zone->total_sector_want_read: 0
<4>[ 5.440138] [ND]zone->total_sector_want_write: 0
<4>[ 5.440148] [ND]zone->total_page_want_write: 0
<4>[ 5.440159] [ND]zone->total_page_want_read: 0
<4>[ 5.440169] [ND]zone->total_page_real_write: 0
<4>[ 5.440179] [ND]zone->total_page_real_read: 0
<4>[ 5.440189] [ND]zone->total_block_real_erase: 0
<4>[ 5.440200] [ND]zone->cache.cache_totals: 0
<4>[ 5.440210] [ND]zone->cfg->nftl_dont_use_cache: 0
<4>[ 5.440221] [ND]zone->cfg->nftl_use_cache_sort: 1
<4>[ 5.440232] [ND]zone->cfg->nftl_support_gc_read_reclaim: 0
<4>[ 5.440243] [ND]zone->cfg->nftl_support_wear_leveling: 1
<4>[ 5.440254] [ND]zone->cfg->nftl_need_erase: 0
<4>[ 5.440264] [ND]zone->cfg->nftl_zone_reserved_block_ratio: 8
<4>[ 5.440276] [ND]zone->cfg->nftl_min_free_block_num: 14
<4>[ 5.440287] [ND]zone->cfg->nftl_gc_threshold_free_block_num: 4
<4>[ 5.440298] [ND]zone->cfg->nftl_min_free_block: 2
<4>[ 5.440309] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
<4>[ 5.440321] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
<4>[ 5.440332] [ND]zone->cfg->nftl_max_cache_num: 500
<4>[ 5.440343] [ND]zone->cfg->nftl_max_cache_write_num: 400
<4>[ 5.440354] [ND]zone->cfg->nftl_cross_talk: 0
<4>[ 5.440363] [ND]nftl ok!
<6>[ 5.444942] nanda:
<6>[ 5.446701] nandb: unknown partition table
<6>[ 5.448276] nandc: unknown partition table
<6>[ 5.449846] nandd: unknown partition table
<6>[ 5.451474] nande: unknown partition table
<6>[ 5.453162] nandf: unknown partition table
<6>[ 5.454780] nandg: unknown partition table
<6>[ 5.456402] nandh: unknown partition table
<6>[ 5.457983] nandi: unknown partition table
<4>[ 5.458352] [ND]nand_partition1
<4>[ 5.458576] [ND]nftl start:1989,250
<4>[ 5.459952] [ND]first
<4>[ 6.034915] [ND]before second 1989 1739.
<4>[ 6.295074] [ND]recover 1776
<4>[ 6.295113] [ND]2013-9-02 15:59 v001
<4>[ 6.295124] [ND]zone->nand_chip->blk_per_chip: 1989
<4>[ 6.295135] [ND]zone->nand_chip->bytes_per_page: 8192
<4>[ 6.295146] [ND]zone->nand_chip->pages_per_blk: 512
<4>[ 6.295156] [ND]zone->test: 0
<4>[ 6.295165] [ND]zone->zone_no: 1
<4>[ 6.295175] [ND]zone->zone_attr: 0
<4>[ 6.295184] [ND]zone->blocks: 1989
<4>[ 6.295193] [ND]zone->bad_block: 0
<4>[ 6.295203] [ND]zone->logic_cap_in_sects: 14245888
<4>[ 6.295214] [ND]zone->backup_cap_in_sects: 2048000
<4>[ 6.295225] [ND]zone->free_block_num: 1804
<4>[ 6.295235] [ND]zone->gc_strategy.start_gc_free_blocks: 31
<4>[ 6.295246] [ND]zone->gc_strategy.stop_gc_free_blocks: 166
<4>[ 6.295257] [ND]zone->gc_strategy.gc_page: 0
<4>[ 6.295268] [ND]zone->gc_strategy.process: 1
<4>[ 6.295278] [ND]zone->prio_gc.prio_type : 0
<4>[ 6.295288] [ND]zone->total_reads : 0
<4>[ 6.295298] [ND]zone->total_write: 0
<4>[ 6.295308] [ND]zone->zone_start_phy_block->phy_block.Block_NO: 0
<4>[ 6.295320] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 1988
<4>[ 6.295332] [ND]zone->zone_phy_page_map_for_gc: e6bcc000
<4>[ 6.295343] [ND]zone->current_block.phy_page_map: e5c90000
<4>[ 6.295355] [ND]zone->current_block.block_info: e512f9c0
<4>[ 6.295366] [ND]zone->current_block.block_info->phy_block.Block_NO: 1776
<4>[ 6.295378] [ND]zone->current_block.page_used: 347
<4>[ 6.295389] [ND]zone->current_block.block_info->block_used_count: 212
<4>[ 6.295402] [ND]zone->temp_page_buf: e510c000
<4>[ 6.295412] [ND]zone->max_erase_num: 1
<4>[ 6.295422] [ND]zone->total_sector_want_read: 0
<4>[ 6.295432] [ND]zone->total_sector_want_write: 0
<4>[ 6.295443] [ND]zone->total_page_want_write: 0
<4>[ 6.295453] [ND]zone->total_page_want_read: 0
<4>[ 6.295463] [ND]zone->total_page_real_write: 0
<4>[ 6.295474] [ND]zone->total_page_real_read: 0
<4>[ 6.295484] [ND]zone->total_block_real_erase: 0
<4>[ 6.295494] [ND]zone->cache.cache_totals: 0
<4>[ 6.295505] [ND]zone->cfg->nftl_dont_use_cache: 0
<4>[ 6.295515] [ND]zone->cfg->nftl_use_cache_sort: 1
<4>[ 6.295526] [ND]zone->cfg->nftl_support_gc_read_reclaim: 0
<4>[ 6.295537] [ND]zone->cfg->nftl_support_wear_leveling: 1
<4>[ 6.295548] [ND]zone->cfg->nftl_need_erase: 0
<4>[ 6.295559] [ND]zone->cfg->nftl_zone_reserved_block_ratio: 8
<4>[ 6.295570] [ND]zone->cfg->nftl_min_free_block_num: 14
<4>[ 6.295581] [ND]zone->cfg->nftl_gc_threshold_free_block_num: 4
<4>[ 6.295593] [ND]zone->cfg->nftl_min_free_block: 2
<4>[ 6.295603] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
<4>[ 6.295615] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
<4>[ 6.295627] [ND]zone->cfg->nftl_max_cache_num: 500
<4>[ 6.295637] [ND]zone->cfg->nftl_max_cache_write_num: 400
<4>[ 6.295648] [ND]zone->cfg->nftl_cross_talk: 0
<4>[ 6.295658] [ND]nftl ok!
<6>[ 6.300027] nandj:
<4>[ 6.300451] [NAND]nand init end
<6>[ 6.300868] init: command 'insmod' r=0
<6>[ 6.300983] init: command 'symlink' r=0
<6>[ 6.301051] init: command 'symlink' r=0
<6>[ 6.301114] init: command 'symlink' r=0
<6>[ 6.301277] init: command 'mkdir' r=0
<6>[ 6.301482] init: command 'mount' r=-1
<6>[ 6.301636] init: command 'mkdir' r=0
<7>[ 6.301855] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
<6>[ 6.301928] init: command 'mount' r=0
<6>[ 6.302178] init: command 'mkdir' r=0
<6>[ 6.302296] init: command 'mount' r=-1
<6>[ 6.302492] init: command 'write' r=0
<6>[ 6.302585] init: command 'chown' r=-2
<6>[ 6.302670] init: command 'chmod' r=-2
<6>[ 6.302886] init: command 'mkdir' r=0
<6>[ 6.303002] init: command 'write' r=0
<6>[ 6.303113] init: command 'write' r=0
<6>[ 6.303208] init: command 'chown' r=-2
<6>[ 6.303298] init: command 'chmod' r=-2
<6>[ 6.303546] init: command 'mkdir' r=0
<6>[ 6.303795] init: command 'mkdir' r=0
<6>[ 6.304065] init: command 'mkdir' r=0
<6>[ 6.304222] init: command 'mkdir' r=0
<6>[ 6.304439] init: command 'mkdir' r=0
<6>[ 6.304609] init: command 'mkdir' r=0
<6>[ 6.304771] init: command 'mkdir' r=0
<6>[ 6.304930] init: command 'mkdir' r=0
<7>[ 6.305071] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
<6>[ 6.305116] init: command 'mount' r=0
<6>[ 6.305294] init: command 'mkdir' r=0
<6>[ 6.305479] init: command 'mkdir' r=0
<6>[ 6.305745] init: command 'mkdir' r=0
<7>[ 6.305879] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
<6>[ 6.305922] init: command 'mount' r=0
<6>[ 6.306083] init: command 'mkdir' r=0
<7>[ 6.306216] SELinux: initialized (dev tmpfs, type tmpfs), uses transition
SIDs
<6>[ 6.306260] init: command 'mount' r=0
<6>[ 6.306450] init: command 'write' r=0
<6>[ 6.306580] init: command 'write' r=-2
<6>[ 6.306707] init: command 'write' r=0
<6>[ 6.306819] init: command 'write' r=-2
<6>[ 6.306926] init: command 'write' r=-2
<6>[ 6.307032] init: command 'write' r=-2
<6>[ 6.307117] init: command 'write' r=0
<6>[ 6.307207] init: command 'write' r=0
<6>[ 6.307298] init: command 'write' r=0
<6>[ 6.307385] init: command 'write' r=0
<6>[ 6.307494] init: command 'write' r=0
<6>[ 6.307595] init: command 'write' r=0
<6>[ 6.307796] init: command 'write' r=0
<6>[ 6.307890] init: command 'write' r=0
<6>[ 6.307979] init: command 'write' r=0
<6>[ 6.308864] init: command 'mkdir' r=0
<7>[ 6.361584] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
<6>[ 6.361657] init: command 'mount' r=0
<6>[ 6.361738] init: command 'chown' r=0
<6>[ 6.361929] init: command 'chown' r=0
<6>[ 6.362024] init: command 'chmod' r=0
<6>[ 6.362083] init: command 'write' r=-22
<6>[ 6.362142] init: command 'write' r=0
<6>[ 6.362199] init: command 'write' r=0
<6>[ 6.362619] init: command 'mkdir' r=0
<6>[ 6.362686] init: command 'chown' r=0
<6>[ 6.362744] init: command 'chmod' r=0
<6>[ 6.362799] init: command 'write' r=0
<6>[ 6.362857] init: command 'write' r=0
<6>[ 6.362914] init: command 'write' r=0
<6>[ 6.363349] init: command 'mkdir' r=0
<6>[ 6.363424] init: command 'chown' r=0
<6>[ 6.363484] init: command 'chmod' r=0
<6>[ 6.363545] init: command 'write' r=0
<6>[ 6.363606] init: command 'write' r=0
<6>[ 6.363666] init: command 'write' r=0
<6>[ 6.363899] init: command 'chown' r=0
<6>[ 6.364062] init: command 'chown' r=0
<6>[ 6.364164] init: command 'chmod' r=0
<6>[ 6.364576] init: command 'mkdir' r=0
<6>[ 6.364607] init: processing action 0x503f0 (init)
<6>[ 6.364628] init: command 'export' r=0
<6>[ 6.364649] init: command 'export' r=0
<6>[ 6.364669] init: command 'export' r=0
<6>[ 6.364688] init: command 'export' r=0
<6>[ 6.364708] init: command 'export' r=0
<6>[ 6.364727] init: command 'export' r=0
<6>[ 6.364747] init: command 'export' r=0
<6>[ 6.364766] init: command 'export' r=0
<6>[ 6.364786] init: command 'export' r=0
<6>[ 6.364807] init: command 'export' r=0
<6>[ 6.364825] init: processing action 0x53bb0 (init)
<6>[ 6.364844] init: command 'export' r=0
<6>[ 6.365013] init: command 'mkdir' r=0
<6>[ 6.365087] init: command 'symlink' r=0
<6>[ 6.365151] init: command 'symlink' r=0
<6>[ 6.365318] init: command 'mkdir' r=0
<6>[ 6.365384] init: command 'symlink' r=0
<6>[ 6.365550] init: command 'mkdir' r=0
<6>[ 6.365615] init: command 'symlink' r=0
<6>[ 6.365678] init: command 'symlink' r=0
<6>[ 6.365842] init: command 'mkdir' r=0
<6>[ 6.366004] init: command 'mkdir' r=0
<6>[ 6.366084] init: command 'symlink' r=0
<6>[ 6.366148] init: command 'symlink' r=0
<6>[ 6.366211] init: command 'symlink' r=0
<6>[ 6.366325] init: command 'mount' r=0
<6>[ 6.366498] init: command 'mkdir' r=0
<6>[ 6.366520] init: processing action 0x53e90 (early-fs)
<6>[ 6.378325] EXT4-fs (nandd): mounted filesystem with ordered data mode.
Opts: (null)
<7>[ 6.378368] SELinux: initialized (dev nandd, type ext4), uses xattr
<4>[ 6.378542] [NAND]unknow cmd!
<6>[ 6.389137] EXT4-fs (nandh): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,errors=remount-ro
<7>[ 6.389179] SELinux: initialized (dev nandh, type ext4), uses xattr
<4>[ 6.390951] [ND]flush cache 1 0!
<6>[ 6.451450] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
<4>[ 6.532010] [ND]flush cache 2 0!
<6>[ 6.532545] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[ 6.532613] e2fsck: /dev/block/by-name/cache: clean, 52/32768 files,
4247/131072 blocks
<6>[ 6.535091] EXT4-fs (nandh): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,barrier=1
<7>[ 6.535137] SELinux: initialized (dev nandh, type ext4), uses xattr
<6>[ 6.545759] EXT4-fs (nandi): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,errors=remount-ro
<7>[ 6.545796] SELinux: initialized (dev nandi, type ext4), uses xattr
<4>[ 6.548360] [ND]flush cache 2 0!
<6>[ 6.631427] fs_mgr: Running /system/bin/e2fsck on
/dev/block/by-name/databk
<4>[ 6.641176] [ND]flush cache 1 0!
<6>[ 6.641775] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[ 6.641817] e2fsck: /dev/block/by-name/databk: clean, 11/8128 files,
1546/32512 blocks
<6>[ 6.644125] EXT4-fs (nandi): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,barrier=1
<7>[ 6.644166] SELinux: initialized (dev nandi, type ext4), uses xattr
<7>[ 6.663858] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced
inode 124360
<6>[ 6.665237] EXT4-fs (nande): 1 orphan inode deleted
<6>[ 6.665252] EXT4-fs (nande): recovery complete
<6>[ 6.668016] EXT4-fs (nande): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,errors=remount-ro
<7>[ 6.668064] SELinux: initialized (dev nande, type ext4), uses xattr
<4>[ 6.681500] [ND]flush cache 10 0!
<6>[ 6.781437] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/data
<4>[ 6.794991] [ND]flush cache 2 0!
<6>[ 6.795505] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[ 6.795548] e2fsck: /dev/block/by-name/data: clean, 2370/327680 files,
266009/1310720 blocks
<6>[ 6.797986] EXT4-fs (nande): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
<7>[ 6.798032] SELinux: initialized (dev nande, type ext4), uses xattr
<6>[ 6.798519] init: command 'mount_all' r=0
<6>[ 6.798577] init: command 'setprop' r=0
<6>[ 7.165706] [DISP]==disp_module_init==
<6>[ 7.166890] [DISP]==disp_probe call==
<6>[ 7.166906] [DISP]==disp_probe finish==
<6>[ 7.167279] [DISP]capture_module_init
<6>[ 7.168165] [DISP]capture_probe
<6>[ 7.168345] [DISP]==capture finish==
<6>[ 7.168356] [DISP]==disp_module_init finish==
<6>[ 7.169950] init: command 'insmod' r=0
<6>[ 7.210481] [LCD]==lcd_module_init==
<4>[ 7.212401] [DISP WRN]
file:drivers/video/sun6i/disp/de_bsp/iep/deu/iep_deu.c,line:458: deu_mode1
not exist.
<4>[ 7.212534] [DISP WRN]
file:drivers/video/sun6i/disp/de_bsp/iep/drc/iep_drc.c,line:565: lcdgamma4iep
for lcd1 not exist.
<6>[ 7.231394] [DISP]==Fb_Init==
<6>[ 7.237356] [LCD]==lcd_module_init finish==
<6>[ 7.237627] init: command 'insmod' r=0
<6>[ 7.274375] [HDMI]==hdmi_module_init==
<6>[ 7.275451] [HDMI]==hdmi_probe call==
<6>[ 7.281664] [DISP]==Fb_Init==
<6>[ 7.281676] [HDMI]==hdmi_probe finish==
<6>[ 7.281876] [HDMI]==hdmi_module_init finish==
<6>[ 7.282123] init: command 'insmod' r=0
<6>[ 7.282172] init: processing action 0x57278 (console_init)
<3>[ 7.282993] init: width = 1024
<3>[ 7.286391] init: height = 600
<3>[ 7.289785] init: s.st_size = 2457600
<6>[ 7.304990] init: command 'console_init' r=0
<6>[ 7.305045] init: processing action 0x53f98 (fs)
<3>[ 7.305970] init: dont need format /dev/block/by-name/UDISK
<6>[ 7.312008] init: command 'format_userdata' r=1
<6>[ 7.314287] init: command 'chown' r=0
<6>[ 7.314947] init: command 'mkdir' r=0
<6>[ 7.315124] init: command 'chmod' r=0
<6>[ 7.315228] init: command 'chmod' r=0
<6>[ 7.315333] init: command 'chown' r=0
<6>[ 7.315437] init: command 'chown' r=0
<4>[ 7.315537] [rfkill]: rfkill set power 1
<4>[ 7.315551] [rtl8723au]: rtl8723au is powered down by bt
<4>[ 7.315564] [sw_hci_sun6i]: ERR: not support sw_usb_disable_ehci
<4>[ 7.315577] [sw_hci_sun6i]: ERR: not support sw_usb_disable_ohci
<4>[ 7.315590] [rtl8723au]: rtl8723au power state change: wifi 0, bt 0 !!
<6>[ 7.331651] init: command 'write' r=0
<6>[ 7.331721] init: command 'chown' r=-2
<6>[ 7.331845] init: command 'chown' r=-30
<6>[ 7.331920] init: command 'chown' r=0
<6>[ 7.331979] init: command 'setprop' r=0
<6>[ 7.349361] rtk_btusb: Realtek Bluetooth USB driver ver 0.9
<6>[ 7.349464] rtk_btusb: btusb_probe 1==========can_wakeup=1 flag2=0
<6>[ 7.349476] rtk_btusb: patch_add
<6>[ 7.349520] rtk_btusb: hci_register_dev e4940400 name bus 1
<6>[ 7.349532] rtk_btusb: id=0
<6>[ 7.349542] rtk_btusb: hdev->name=hci0
<3>[ 7.349551] rtk_btusb: ===================hci_register_dev success
<6>[ 7.356802] usbcore: registered new interface driver rtk_btusb
<4>[ 7.356816] Registering file operations for btfcd driver
<4>[ 7.357387] Class driver initialized successfully
<6>[ 7.357529] init: command 'insmod' r=0
<6>[ 7.357625] rtk_btusb: btfcd open
<6>[ 7.357630]
<6>[ 7.357642] rtk_btusb: btusb_open start pm_usage_cnt(0x0)
<6>[ 7.357653] rtk_btusb: download_patch start
<6>[ 7.358804] rtk_btusb: check_fw_version : read_ver_rsp->lmp_subver =
0x1200
<6>[ 7.358818] rtk_btusb: load_firmware
<6>[ 8.031803] rtk_btusb: check_fw_version : read_ver_rsp->lmp_subver =
0x963e
<6>[ 8.031820] rtk_btusb: Rtk patch end 0
<6>[ 8.032286] rtk_btusb: btusb_open end pm_usage_cnt(0x0)
<6>[ 8.032326] rtk_btusb: btfcd close
<6>[ 8.032331]
<6>[ 8.032341] rtk_btusb: btusb_flush add delay
<6>[ 8.042355] rtk_btusb: btusb_close
<6>[ 8.063063] init: command 'chmod' r=0
<6>[ 8.063118] rtk_btusb: btfcd open
<6>[ 8.063122]
<6>[ 8.063133] rtk_btusb: btusb_open start pm_usage_cnt(0x0)
<6>[ 8.063144] rtk_btusb: download_patch start
<6>[ 8.064792] rtk_btusb: check_fw_version : read_ver_rsp->lmp_subver =
0x963e
<6>[ 8.064806] rtk_btusb: Rtk patch end 1
<6>[ 8.065270] rtk_btusb: btusb_open end pm_usage_cnt(0x0)
<6>[ 8.065298] rtk_btusb: btfcd close
<6>[ 8.065303]
<6>[ 8.065312] rtk_btusb: btusb_flush add delay
<6>[ 8.075325] rtk_btusb: btusb_close
<6>[ 8.095931] init: command 'chown' r=0
<6>[ 8.096660] init: command 'mkdir' r=0
<4>[ 8.295765] create_regulator: axp22_DCDC2: Failed to create debugfs
directory
<7>[ 8.296367] GPU power on
<6>[ 8.313664] init: command 'insmod' r=0
<4>[ 8.328839] #####: Device 0: Framebuffer physical address: 0x43100000
<6>[ 8.328993] init: command 'insmod' r=0
<6>[ 8.329224] init: command 'chmod' r=0
<6>[ 8.329339] init: command 'chmod' r=0
<6>[ 8.329480] init: command 'chmod' r=0
<6>[ 8.329583] init: command 'chmod' r=0
<6>[ 8.329688] init: command 'chown' r=0
<6>[ 8.329788] init: command 'chown' r=0
<4>[ 8.329891] [rfkill]: rfkill set power 1
<4>[ 8.329906] [rtl8723au]: rtl8723au is powered down by bt
<4>[ 8.329919] [rtl8723au]: rtl8723au power state change: wifi 0, bt 0 !!
<6>[ 8.341589] init: command 'write' r=0
<6>[ 8.341652] init: command 'setprop' r=0
<6>[ 8.353676] init: command 'insmod' r=0
<6>[ 8.363537] init: command 'insmod' r=0
<4>[ 8.383587] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 8.383618] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 8.383644] create_regulator: axp22_ldo9: Failed to create debugfs
directory
<4>[ 8.383685] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 8.383709] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 8.383735] create_regulator: axp22_ldo10: Failed to create debugfs
directory
<4>[ 8.581577] [i2c0] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[ 9.081570] [i2c0] incomplete xfer (status: 0x20, dev addr: 0x3c)
<6>[ 9.381544] init: command 'insmod' r=0
<6>[ 9.392106] init: command 'insmod' r=0
<6>[ 9.404096] init: command 'insmod' r=0
<6>[ 9.410835] init: command 'insmod' r=0
<6>[ 9.416454] init: command 'insmod' r=0
<6>[ 9.430086] init: command 'insmod' r=0
<6>[ 9.444126] init: command 'insmod' r=0
<6>[ 9.458508] init: command 'insmod' r=0
<5>[ 9.533501] [VFE]Welcome to Video Front End driver
<5>[ 9.534093] [VFE]pdev->id = 1
<5>[ 9.534105] [VFE]dev->mipi_sel = 1
<5>[ 9.534115] [VFE]dev->vip_sel = 1
<5>[ 9.534125] [VFE]dev->isp_sel = 0
<4>[ 9.534140] hhhccc20140528:vip1_para vip_dev_qty=2
<5>[ 9.534422] [VFE]vip_pin_list addr = 0
<5>[ 9.534434] [VFE]request gpio cnt=18, i=16
<5>[ 9.534806] [VFE]vfe_init end
<6>[ 9.535201] init: command 'insmod' r=0
<5>[ 9.541406] [VFE]probe_work_handle start!
<5>[ 9.542049] [VFE]registered sub device,input_num = 0
<5>[ 9.542519] [VFE]registered act sub device,input_num = 0
<4>[ 9.542568] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 9.542594] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 9.542621] create_regulator: axp22_ldo9: Failed to create debugfs
directory
<4>[ 9.542645] create_regulator: axp22_ldoio0: Failed to create debugfs
directory
<5>[ 9.542658] [VFE]registered sub device,input_num = 1
<4>[ 9.542682] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 9.542706] create_regulator: axp22_ldo7: Failed to create debugfs
directory
<4>[ 9.542732] create_regulator: axp22_ldo10: Failed to create debugfs
directory
<4>[ 9.542754] create_regulator: axp22_ldoio0: Failed to create debugfs
directory
<5>[ 9.542769] [VFE]power on and standy on camera 0!
<4>[ 9.554831] [VFE_WARN]invalid gpio
<7>[ 9.563378] G2D: drv_g2d_init
<6>[ 9.563586] G2D: Module initialized.major:244
<6>[ 9.563763] init: command 'insmod' r=0
<6>[ 9.575343] init: command 'insmod' r=0
<4>[ 9.576265] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
<5>[ 9.589726] [VFE]mclk on
<4>[ 9.591622] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
<4>[ 9.611596] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
<4>[ 9.631595] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
<4>[ 9.643893] gslX680_cof: no versions for exported symbols: kernel tainted.
<4>[ 9.643916] Disabling lock debugging due to kernel taint
<4>[ 9.645545]
CTP****************************************
<4>[ 9.645569] *CTP*ctp_get_system_config:fwname:gsl3675_1078
<4>[ 9.651604] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
<4>[ 9.661632] i2c-core: driver [gslX680] using legacy suspend method
<4>[ 9.661646] i2c-core: driver [gslX680] using legacy resume method
<4>[ 9.661673] *CTP*ctp_detect: addr= 40
<4>[ 9.662164] *CTP*GSLX680 Enter gsl_ts_probe
<4>[ 9.662320] CTP[GSLX680] Enter gsl_ts_init_ts
<6>[ 9.662769] input: gslX680 as
/devices/platform/sun6i-i2c.1/i2c-1/1-0040/input/input2
<4>[ 9.663190] CTP[GSLX680] End gsl_ts_probe
<4>[ 9.663227]
CTP****************************************
<6>[ 9.663652] init: command 'insmod' r=0
<6>[ 9.671744] input: sw-keyboard as /devices/virtual/input/input3
<4>[ 9.672020] get_device_para_value:get subname:ls_used error! val.val:0
<4>[ 9.672035] get sysconfig para erro!
<4>[ 9.672056] get sysconfig para erro!
<6>[ 9.672238] init: command 'insmod' r=0
<6>[ 9.680683] input: sunxi-temp as /devices/virtual/input/input4
<6>[ 9.681139] init: command 'insmod' r=0
<5>[ 9.694513] [VFE]mclk off
<5>[ 9.694539] [VFE]power on and standy on camera 1!
<4>[ 9.694556] ------------[ cut here ]------------
<4>[ 9.694582] WARNING: at drivers/gpio/gpiolib.c:101
gpio_ensure_requested+0x5c/0x1c4()
<4>[ 9.694593] autorequest GPIO-105
<4>[ 9.694600] Modules linked in: sunxi_temperature sw_keyboard
gslX680_cof(F) sw_device g2d_33 vfe_v4l2 gc2035 gc0308 vfe_subdev vfe_os cci
ad5820_act actuator cam_detect videobuf_dma_contig videobuf_core dc_sunxi(O)
pvrsrvkm(O) rtk_btusb hdmi lcd disp nand(O)
<4>[ 9.694693] Backtrace:
<4>[ 9.694718] [] (dump_backtrace+0x0/0x118) from []
(dump_stack+0x20/0x24)
<4>[ 9.694732] r6:c07451b6 r5:00000065 r4:e5ca7dd8 r3:c082deb4
<4>[ 9.694766] [] (dump_stack+0x0/0x24) from []
(warn_slowpath_common+0x5c/0x74)
<4>[ 9.694787] [] (warn_slowpath_common+0x0/0x74) from []
(warn_slowpath_fmt+0x40/0x48)
<4>[ 9.694800] r8:c082c6b8 r7:c08d172c r6:00000064 r5:00000000 r4:c08d1730
<4>[ 9.694824] r3:00000009
<4>[ 9.694843] [] (warn_slowpath_fmt+0x0/0x48) from []
(gpio_ensure_requested+0x5c/0x1c4)
<4>[ 9.694856] r3:00000069 r2:c0745258
<4>[ 9.694880] [] (gpio_ensure_requested+0x0/0x1c4) from
[] (gpio_direction_output+0x88/0x2b4)
<4>[ 9.694907] [] (gpio_direction_output+0x0/0x2b4) from
[] (os_gpio_set_status+0x34/0xb0 [vfe_os])
<4>[ 9.694934] [] (os_gpio_set_status+0x0/0xb0 [vfe_os]) from
[] (vfe_gpio_set_status+0xc4/0xcc [vfe_subdev])
<4>[ 9.694949] r4:00000001 r3:00000000
<4>[ 9.694978] [] (vfe_gpio_set_status+0x0/0xcc [vfe_subdev]) from
[] (sensor_power+0xc4/0x2c0 [gc0308])
<4>[ 9.694992] r5:e47d8e00 r4:e4aeb4c0
<4>[ 9.695060] [] (sensor_power+0x0/0x2c0 [gc0308]) from
[] (probe_work_handle+0x5e8/0x83c [vfe_v4l2])
<4>[ 9.695074] r6:00000001 r5:e4790b6c r4:e47900fc r3:bf1fc248
<4>[ 9.695137] [] (probe_work_handle+0x0/0x83c [vfe_v4l2]) from
[] (process_one_work+0x290/0x488)
<4>[ 9.695159] [] (process_one_work+0x0/0x488) from []
(worker_thread+0x1a8/0x2a4)
<4>[ 9.695181] [] (worker_thread+0x0/0x2a4) from []
(kthread+0x9c/0xa8)
<4>[ 9.695203] [] (kthread+0x0/0xa8) from []
(do_exit+0x0/0x784)
<4>[ 9.695215] r6:c0063614 r5:c007edcc r4:e6895ed0
<4>[ 9.695235] ---[ end trace 9e882d97e10e1fee ]---
<6>[ 9.699251] usbcore: registered new interface driver asix
<6>[ 9.699387] init: command 'insmod' r=0
<4>[ 9.707285] [VFE_WARN]invalid gpio
<6>[ 9.714429] usbcore: registered new interface driver qf9700
<6>[ 9.714556] init: command 'insmod' r=0
<6>[ 9.728966] usbcore: registered new interface driver MOSCHIP usb-ethernet
driver
<6>[ 9.729093] init: command 'insmod' r=0
<5>[ 9.741418] [VFE]mclk on
<6>[ 9.744988] usbcore: registered new interface driver rtl8150
<6>[ 9.745127] init: command 'insmod' r=0
<6>[ 9.745173] init: processing action 0x46348 (post-fs)
<6>[ 9.745265] init: command 'mount' r=0
<6>[ 9.745365] init: command 'mount' r=0
<6>[ 9.745408] init: command 'mount' r=0
<6>[ 9.745562] init: command 'chown' r=0
<6>[ 9.745628] init: command 'chmod' r=0
<6>[ 9.745902] init: command 'restorecon' r=0
<6>[ 9.747216] init: command 'chown' r=0
<6>[ 9.747288] init: command 'chmod' r=0
<6>[ 9.747521] init: command 'restorecon' r=0
<6>[ 9.747654] init: command 'chown' r=0
<6>[ 9.747748] init: command 'chmod' r=0
<6>[ 9.747840] init: command 'chown' r=0
<6>[ 9.747932] init: command 'chmod' r=0
<6>[ 9.748066] init: command 'chown' r=0
<6>[ 9.748158] init: command 'chmod' r=0
<6>[ 9.748250] init: command 'chown' r=0
<6>[ 9.748339] init: command 'chmod' r=0
<6>[ 9.748415] init: command 'chown' r=-2
<6>[ 9.748477] init: command 'chmod' r=-2
<6>[ 9.748851] init: command 'mkdir' r=0
<6>[ 9.748886] init: processing action 0x4c5a0 (post-fs-data)
<6>[ 9.748965] init: command 'chown' r=0
<6>[ 9.749027] init: command 'chmod' r=0
<6>[ 9.749208] init: command 'restorecon' r=0
<6>[ 9.753346] init: command 'copy' r=0
<6>[ 9.754321] init: command 'mkdir' r=0
<6>[ 9.754370] init: command 'copy' r=-1
<6>[ 9.754979] init: command 'chown' r=-2
<6>[ 9.755026] init: command 'chmod' r=-2
<6>[ 9.755065] init: command 'copy' r=-1
<6>[ 9.755126] init: command 'chown' r=-2
<6>[ 9.755169] init: command 'chmod' r=-2
<6>[ 9.755212] init: command 'write' r=-2
<6>[ 9.755508] init: command 'mkdir' r=0
<6>[ 9.755892] init: command 'mkdir' r=0
<6>[ 9.756196] init: command 'mkdir' r=0
<6>[ 9.756497] init: command 'mkdir' r=0
<6>[ 9.756872] init: command 'mkdir' r=0
<6>[ 9.757212] init: command 'mkdir' r=0
<6>[ 9.757504] init: command 'mkdir' r=0
<6>[ 9.757831] init: command 'mkdir' r=0
<6>[ 9.758168] init: command 'mkdir' r=0
<6>[ 9.758519] init: command 'mkdir' r=0
<6>[ 9.758892] init: command 'mkdir' r=0
<6>[ 9.759250] init: command 'mkdir' r=0
<6>[ 9.759957] init: command 'chmod' r=0
<6>[ 9.760031] init: command 'chown' r=0
<6>[ 9.760377] init: command 'mkdir' r=0
<6>[ 9.760728] init: command 'mkdir' r=0
<6>[ 9.760794] init: command 'chown' r=0
<6>[ 9.761669] init: command 'mkdir' r=0
<6>[ 9.762580] init: command 'mkdir' r=0
<6>[ 9.762919] init: command 'mkdir' r=0
<6>[ 9.763843] init: command 'mkdir' r=0
<6>[ 9.773421] init: command 'mkdir' r=0
<6>[ 9.774423] init: command 'mkdir' r=0
<6>[ 9.775317] init: command 'mkdir' r=0
<6>[ 9.777306] init: command 'mkdir' r=0
<6>[ 9.778252] init: command 'mkdir' r=0
<6>[ 9.779122] init: command 'mkdir' r=0
<6>[ 9.779981] init: command 'mkdir' r=0
<6>[ 9.780872] init: command 'mkdir' r=0
<4>[ 9.781422] get_device_para_value:get subname:gslX680_cob error! val.val:0
<4>[ 9.781437] get_detect_list: script_get_item err.support_number = 8.
<4>[ 9.781451] get_device_para_value:get subname:ilitek_aimvF error!
val.val:0
<4>[ 9.781464] get_detect_list: script_get_item err.support_number = 7.
<4>[ 9.781481] get_device_para_value:get subname:gt9xx error! val.val:0
<4>[ 9.781494] get_detect_list: script_get_item err.support_number = 3.
<4>[ 9.781507] get_device_para_value:get subname:gslX680_cof error! val.val:0
<4>[ 9.781520] get_detect_list: script_get_item err.support_number = 2.
<6>[ 9.783916] init: command 'mkdir' r=0
<6>[ 9.784849] init: command 'mkdir' r=0
<6>[ 9.784915] init: command 'chown' r=0
<6>[ 9.784978] init: command 'chmod' r=0
<6>[ 9.785307] init: command 'mkdir' r=0
<6>[ 9.786213] init: command 'mkdir' r=0
<6>[ 9.788127] init: command 'mkdir' r=0
<6>[ 9.788207] init: command 'symlink' r=-1
<6>[ 9.789135] init: command 'mkdir' r=0
<6>[ 9.789197] init: command 'setprop' r=0
<6>[ 9.789218] init: processing action 0x51508 (post-fs-data)
<6>[ 9.789395] init: command 'chown' r=0
<6>[ 9.789534] init: command 'chmod' r=0
<6>[ 9.789638] init: command 'chown' r=0
<6>[ 9.789737] init: command 'chmod' r=0
<6>[ 9.789757] init: processing action 0x53f68 (post-fs-data)
<6>[ 9.789777] init: processing action 0x572c0 (mix_hwrng_into_linux_rng)
<3>[ 9.789835] init: /dev/hw_random not found
<6>[ 9.794408] init: command 'mix_hwrng_into_linux_rng' r=0
<6>[ 9.794430] init: processing action 0x57308 (property_service_init)
<6>[ 9.799498] init: Created socket '/dev/socket/property_service' with mode
'666', user '0', group '0'
<6>[ 9.799536] init: command 'property_service_init' r=0
<6>[ 9.799563] init: processing action 0x57350 (signal_init)
<6>[ 9.799696] init: command 'signal_init' r=0
<6>[ 9.799719] init: processing action 0x57398 (check_startup)
<6>[ 9.799808] init: command 'check_startup' r=0
<6>[ 9.799839] init: processing action 0x4cec8 (boot)
<6>[ 9.800796] init: command 'ifup' r=0
<6>[ 9.800950] init: command 'hostname' r=0
<6>[ 9.801052] init: command 'domainname' r=0
<6>[ 9.801083] init: command 'setrlimit' r=0
<6>[ 9.801179] init: command 'write' r=0
<6>[ 9.801271] init: command 'write' r=0
<6>[ 9.801355] init: command 'chown' r=0
<6>[ 9.801460] init: command 'chmod' r=0
<6>[ 9.801530] init: command 'chown' r=0
<6>[ 9.801598] init: command 'chmod' r=0
<6>[ 9.801732] init: command 'chown' r=0
<6>[ 9.801841] init: command 'chmod' r=0
<6>[ 9.801955] init: command 'write' r=0
<6>[ 9.802045] init: command 'write' r=0
<6>[ 9.802110] init: command 'chown' r=-2
<6>[ 9.802169] init: command 'chown' r=-2
<6>[ 9.802229] init: command 'chown' r=-2
<6>[ 9.802287] init: command 'chown' r=-2
<6>[ 9.802346] init: command 'chown' r=-2
<6>[ 9.802414] init: command 'chown' r=-2
<6>[ 9.802480] init: command 'chown' r=0
<6>[ 9.802544] init: command 'chown' r=0
<6>[ 9.802608] init: command 'chown' r=0
<6>[ 9.802672] init: command 'chown' r=0
<6>[ 9.802734] init: command 'chmod' r=0
<6>[ 9.802796] init: command 'chmod' r=0
<6>[ 9.802858] init: command 'chmod' r=0
<6>[ 9.802947] init: command 'chown' r=-2
<6>[ 9.803028] init: command 'chmod' r=-2
<6>[ 9.803112] init: command 'chown' r=-2
<6>[ 9.803193] init: command 'chmod' r=-2
<6>[ 9.803276] init: command 'chown' r=-2
<6>[ 9.803357] init: command 'chmod' r=-2
<6>[ 9.803439] init: command 'chown' r=-2
<6>[ 9.803520] init: command 'chmod' r=-2
<6>[ 9.803602] init: command 'chown' r=-2
<6>[ 9.803683] init: command 'chmod' r=-2
<6>[ 9.803766] init: command 'chown' r=-2
<6>[ 9.803847] init: command 'chmod' r=-2
<6>[ 9.803929] init: command 'chown' r=-2
<6>[ 9.804011] init: command 'chmod' r=-2
<6>[ 9.804095] init: command 'chown' r=-2
<6>[ 9.804176] init: command 'chmod' r=-2
<6>[ 9.804258] init: command 'chown' r=-2
<6>[ 9.804341] init: command 'chown' r=-2
<6>[ 9.804423] init: command 'chmod' r=-2
<6>[ 9.804505] init: command 'chown' r=-2
<6>[ 9.804588] init: command 'chmod' r=-2
<6>[ 9.804670] init: command 'chown' r=-2
<6>[ 9.804754] init: command 'chmod' r=-2
<6>[ 9.804834] init: command 'chown' r=0
<6>[ 9.804908] init: command 'chmod' r=0
<6>[ 9.804983] init: command 'chown' r=0
<6>[ 9.805056] init: command 'chmod' r=0
<6>[ 9.805131] init: command 'chown' r=0
<6>[ 9.805205] init: command 'chmod' r=0
<6>[ 9.805281] init: command 'chown' r=0
<6>[ 9.805355] init: command 'chmod' r=0
<6>[ 9.805430] init: command 'chown' r=0
<6>[ 9.805504] init: command 'chmod' r=0
<6>[ 9.805580] init: command 'chown' r=-2
<6>[ 9.805650] init: command 'chown' r=-2
<6>[ 9.805718] init: command 'chown' r=-2
<6>[ 9.805785] init: command 'chown' r=-2
<6>[ 9.805852] init: command 'chown' r=-2
<6>[ 9.805918] init: command 'chown' r=-2
<6>[ 9.805987] init: command 'chown' r=-2
<6>[ 9.806052] init: command 'chown' r=-2
<6>[ 9.806118] init: command 'chown' r=-2
<6>[ 9.806184] init: command 'chown' r=-2
<6>[ 9.806249] init: command 'chown' r=-2
<6>[ 9.806317] init: command 'chown' r=-2
<6>[ 9.806383] init: command 'chown' r=-2
<6>[ 9.806448] init: command 'chown' r=-2
<6>[ 9.806516] init: command 'chown' r=-2
<6>[ 9.806583] init: command 'chown' r=-2
<6>[ 9.806649] init: command 'chown' r=-2
<6>[ 9.806724] init: command 'chown' r=-2
<6>[ 9.806794] init: command 'chown' r=-2
<6>[ 9.806863] init: command 'chown' r=0
<6>[ 9.806929] init: command 'chown' r=0
<6>[ 9.806996] init: command 'chown' r=0
<6>[ 9.807062] init: command 'chown' r=0
<6>[ 9.807129] init: command 'chown' r=0
<6>[ 9.807196] init: command 'chown' r=0
<6>[ 9.807306] init: command 'chown' r=0
<6>[ 9.807421] init: command 'chown' r=0
<6>[ 9.807490] init: command 'chown' r=0
<6>[ 9.807617] init: command 'chmod' r=-30
<6>[ 9.807699] init: command 'setprop' r=0
<6>[ 9.807772] init: command 'setprop' r=0
<6>[ 9.807843] init: command 'setprop' r=0
<6>[ 9.807915] init: command 'setprop' r=0
<6>[ 9.807987] init: command 'setprop' r=0
<6>[ 9.808058] init: command 'setprop' r=0
<6>[ 9.808129] init: command 'setprop' r=0
<6>[ 9.808201] init: command 'setprop' r=0
<6>[ 9.808273] init: command 'setprop' r=0
<6>[ 9.808345] init: command 'setprop' r=0
<6>[ 9.808417] init: command 'setprop' r=0
<6>[ 9.808458] init: command 'setprop' r=0
<5>[ 9.808604] init: starting 'healthd'
<6>[ 9.809274] init: computing context for service
'/system/bin/servicemanager'
<3>[ 9.811452] healthd: wakealarm_init: timerfd_create failed
<5>[ 9.812355] init: starting 'servicemanager'
<6>[ 9.812980] init: computing context for service '/system/bin/vold'
<5>[ 9.813196] init: starting 'vold'
<6>[ 9.814425] init: Created socket '/dev/socket/vold' with mode '660', user
'0', group '1009'
<6>[ 9.815373] init: computing context for service
'/system/vendor/bin/pvrsrvctl'
<5>[ 9.815673] init: starting 'pvrsrvctl'
<6>[ 9.816037] init: command 'class_start' r=0
<6>[ 9.816357] init: computing context for service '/system/bin/netd'
<5>[ 9.816571] init: starting 'netd'
<6>[ 9.817203] init: computing context for service '/system/bin/debuggerd'
<5>[ 9.817426] init: starting 'debuggerd'
<6>[ 9.818098] init: computing context for service
'/system/bin/surfaceflinger'
<5>[ 9.818340] init: starting 'surfaceflinger'
<6>[ 9.819039] init: computing context for service '/system/bin/app_process'
<5>[ 9.819300] init: starting 'zygote'
<6>[ 9.819346] init: Created socket '/dev/socket/mdns' with mode '660', user
'0', group '1000'
<6>[ 9.819549] binder: 1305:1305 transaction failed 29189, size 0-0
<6>[ 9.819835] init: Created socket '/dev/socket/dnsproxyd' with mode '660',
user '0', group '3003'
<6>[ 9.819955] init: computing context for service '/system/bin/drmserver'
<5>[ 9.820232] init: starting 'drm'
<6>[ 9.820259] init: Created socket '/dev/socket/netd' with mode '660', user
'0', group '1000'
<6>[ 9.820883] init: computing context for service '/system/bin/mediaserver'
<5>[ 9.821156] init: starting 'media'
<6>[ 9.821412] init: Created socket '/dev/socket/zygote' with mode '660',
user '0', group '1000'
<6>[ 9.821884] init: computing context for service '/system/bin/installd'
<5>[ 9.822120] init: starting 'installd'
<3>[ 9.822539] init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
<6>[ 9.823364] init: Created socket '/dev/socket/installd' with mode '600',
user '1000', group '1000'
<6>[ 9.832120] init: computing context for service '/system/bin/keystore'
<5>[ 9.832362] init: starting 'keystore'
<6>[ 9.833076] init: computing context for service '/system/bin/rild'
<5>[ 9.833345] init: starting 'ril-daemon'
<6>[ 9.833980] init: computing context for service '/system/bin/u3gmonitor'
<5>[ 9.834193] init: starting 'u3gmonitor'
<6>[ 9.834576] init: command 'class_start' r=0
<6>[ 9.834685] init: processing action 0x56dd8 (boot)
<6>[ 9.834818] init: command 'chmod' r=0
<6>[ 9.834908] init: command 'chown' r=0
<6>[ 9.834990] init: command 'chown' r=0
<6>[ 9.835011] init: Created socket '/dev/socket/rild-debug' with mode '660',
user '1001', group '1000'
<6>[ 9.835069] init: command 'chown' r=0
<6>[ 9.835171] init: command 'chown' r=0
<6>[ 9.835254] init: command 'chown' r=0
<6>[ 9.835337] init: command 'chown' r=0
<6>[ 9.835373] init: Created socket '/dev/socket/rild' with mode '660', user
'0', group '1001'
<6>[ 9.835417] init: command 'chown' r=0
<6>[ 9.835500] init: command 'chown' r=0
<6>[ 9.835620] init: command 'chown' r=-2
<6>[ 9.835695] init: command 'chown' r=0
<6>[ 9.835765] init: command 'chmod' r=0
<6>[ 9.835830] init: command 'chmod' r=0
<6>[ 9.835897] init: command 'chmod' r=0
<6>[ 9.835974] init: command 'chmod' r=0
<6>[ 9.836058] init: command 'chmod' r=0
<6>[ 9.836130] init: command 'chmod' r=0
<6>[ 9.836202] init: command 'chmod' r=0
<6>[ 9.836276] init: command 'chmod' r=0
<6>[ 9.836371] init: command 'chmod' r=-2
<6>[ 9.836436] init: command 'chmod' r=0
<5>[ 9.846586] [VFE]mclk off
<5>[ 9.847171] [VFE]V4L2 device registered as video1
<5>[ 9.847207] [VFE]register_early_suspend @ probe handle!
<5>[ 9.847219] [VFE]probe_work_handle end!
<6>[ 9.881571] init: command 'chown' r=0
<6>[ 9.951569] init: command 'chmod' r=0
<6>[ 9.951626] init: processing action 0x573e0 (queue_property_triggers)
<6>[ 9.951727] init: command 'queue_property_triggers' r=0
<6>[ 9.951751] init: processing action 0x4dee8 (nonencrypted)
<6>[ 9.951776] init: command 'class_start' r=0
<6>[ 9.951796] init: processing action 0x4e5c0 (property:ro.debuggable=1)
<6>[ 9.952151] init: computing context for service '/system/bin/sh'
<5>[ 9.952412] init: starting 'console'
<6>[ 9.952831] init: command 'start' r=0
<6>[ 9.952934] init: processing action 0x51f00
(property:persist.sys.usb.config=*)
<6>[ 9.953029] init: command 'setprop' r=0
<6>[ 9.953055] init: processing action 0x54de8
(property:persist.sys.root_access=1)
<6>[ 9.953300] init: computing context for service '/system/bin/su'
<5>[ 9.953519] init: starting 'su_daemon'
<6>[ 9.953918] init: command 'start' r=0
<6>[ 9.953998] init: processing action 0x55cf8
(property:sys.usb.config=mass_storage,adb)
<3>[ 9.954148] android_usb: already disabled
<6>[ 9.958640] init: command 'write' r=0
<6>[ 9.958790] init: command 'write' r=0
<6>[ 9.958907] init: command 'write' r=0
<6>[ 9.959059] init: command 'write' r=0
<6>[ 9.959203] init: command 'write' r=0
<5>[ 9.959436] init: starting 'adbd'
<6>[ 9.959871] init: command 'start' r=0
<6>[ 9.959943] init: command 'setprop' r=0
<6>[ 9.961751] init: Created socket '/dev/socket/adbd' with mode '660', user
'1000', group '1000'
<6>[ 9.964835] adb_open
<4>[ 9.964872] ep_matches, wrn: endpoint already claimed, ep(0xc084cf04,
0xe690aa80, ep1in-bulk)
<6>[ 9.964895] adb_bind_config
<4>[ 9.964913] ep_matches, wrn: endpoint already claimed, ep(0xc084cf04,
0xe690aa80, ep1in-bulk)
<4>[ 9.964933] ep_matches, wrn: endpoint already claimed, ep(0xc084cf50,
0xe690aa80, ep1out-bulk)
<4>[ 9.964955] ep_matches, wrn: endpoint already claimed, ep(0xc084cf04,
0xe690aa80, ep1in-bulk)
<4>[ 9.964972] ep_matches, wrn: endpoint already claimed, ep(0xc084cf50,
0xe690aa80, ep1out-bulk)
<4>[ 9.964988] ep_matches, wrn: endpoint already claimed, ep(0xc084cf9c,
0xe6b19b00, ep2in-bulk)
<4>[ 9.965007] [sw_udc]: alloc request: ep(0xc084cfe8, ep2out-bulk, 512),
req(0xe4941a40)
<4>[ 9.965533] [sw_udc]: alloc request: ep(0xc084cf9c, ep2in-bulk, 512),
req(0xe4912940)
<4>[ 9.965557] [sw_udc]: alloc request: ep(0xc084cf9c, ep2in-bulk, 512),
req(0xe5c46440)
<4>[ 9.965985] [sw_udc]: alloc request: ep(0xc084cf9c, ep2in-bulk, 512),
req(0xe5c463c0)
<4>[ 9.966008] [sw_udc]: alloc request: ep(0xc084cf9c, ep2in-bulk, 512),
req(0xe5c46340)
<4>[ 9.966363] [sw_udc]: sw_udc_pullup, is_on = 1
<4>[ 9.966376] [sun6i_usb]: usb device is not active
<4>[ 10.091639] =============gsl_load_fw start==============
<6>[ 10.141965] init: waitpid returned pid 1308, status = 00000000
<5>[ 10.141995] init: process 'pvrsrvctl', pid 1308 exited
<4>[ 10.151873] version number: 36
<4>[ 10.151887] chip_type = 0x1
<4>[ 10.151896] gsl3680B
<4>[ 10.151907] fw_name is :gsl3675_1078_b
<4>[ 10.151918] CTP=============gsl_load_fw start==============
<4>[ 10.737671] CTP=============gsl_load_fw end==============
<6>[ 10.769149] init: computing context for service
'/system/bin/bootanimation'
<5>[ 10.769377] init: starting 'bootanim'
<4>[ 10.770545] [DISP WRN]
file:drivers/video/sun6i/disp/de_bsp/de/disp_layer.c,line:363: all layer
resource used!
<6>[ 10.822183] healthd: battery l=62 v=3741 t=30.0 h=2 st=3 c=672 chg=
<6>[ 10.826729] healthd: battery l=62 v=3741 t=30.0 h=2 st=3 c=672 chg=
<6>[ 10.827887] healthd: battery l=62 v=3741 t=30.0 h=2 st=3 c=672 chg=
<6>[ 12.128706] init: waitpid returned pid 1729, status = 00000000
<3>[ 12.128748] init: untracked pid 1729 exited
<6>[ 17.766792] warning: zygote' uses 32-bit capabilities (legacy support in
use)
<6>[ 17.948032] gsensor_detect:addr= 0x18,i2c_num:0
<4>[ 17.948246] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
<6>[ 17.948261] Read ID value is :-70
<6>[ 17.948273] gsensor_detect:addr= 0x19,i2c_num:1
<6>[ 17.948619] Read ID value is :249
<6>[ 17.948630] Bosch Sensortec Device detected!
<6>[ 17.948635] BMA250E registered I2C driver!
<6>[ 17.951152] input: bma250 as /devices/virtual/input/input5
<4>[ 18.002204] ==gsl_ts_exit==
<4>[ 18.002319] ==gsl_ts_remove=
<4>[ 18.083506]
CTP****************************************
<4>[ 18.083534] *CTP*ctp_get_system_config:fwname:gsl3675_1078
<4>[ 18.101725] i2c-core: driver [gslX680] using legacy suspend method
<4>[ 18.101740] i2c-core: driver [gslX680] using legacy resume method
<4>[ 18.101769] *CTP*ctp_detect: addr= 40
<4>[ 18.102340] *CTP*GSLX680 Enter gsl_ts_probe
<4>[ 18.102506] CTP[GSLX680] Enter gsl_ts_init_ts
<6>[ 18.103048] input: gslX680 as
/devices/platform/sun6i-i2c.1/i2c-1/1-0040/input/input6
<4>[ 18.103575] CTP[GSLX680] End gsl_ts_probe
<4>[ 18.103616]
CTP****************************************
<6>[ 18.104518] init: processing action 0x4e808 (property:sys.sensors=1)
<6>[ 18.104742] init: computing context for service '/system/bin/busybox'
<5>[ 18.104987] init: starting 'sensors'
<6>[ 18.105446] init: command 'start' r=0
<6>[ 18.187008] init: waitpid returned pid 2175, status = 00000000
<5>[ 18.187036] init: process 'sensors', pid 2175 exited
<4>[ 18.531428] =============gsl_load_fw start==============
<4>[ 18.591872] version number: 36
<4>[ 18.591887] chip_type = 0x1
<4>[ 18.591896] gsl3680B
<4>[ 18.591907] fw_name is :gsl3675_1078_b
<4>[ 18.591917] CTP=============gsl_load_fw start==============
<4>[ 19.148486] CTP=============gsl_load_fw end==============
<6>[ 34.404424] healthd: battery l=62 v=3726 t=30.0 h=2 st=3 c=726 chg=
<6>[ 34.410396] request_suspend_state: wakeup (3->0) at 34359022517
(2016-12-17 15:05:11.695343182 UTC)
<6>[ 34.495367] init: processing action 0x4e1f8
(property:sys.sysctl.extra_free_kbytes=*)
<6>[ 34.495715] init: command 'write' r=0
<6>[ 35.098649] acc_open
<6>[ 35.098679] acc_release
<4>[ 36.833901] [rtl8723au]: rtl8723au is powered up by wifi
<4>[ 36.833926] [sw_hci_sun6i]: ERR: not support sw_usb_enable_ehci
<4>[ 36.833938] [sw_hci_sun6i]: ERR: not support sw_usb_enable_ohci
<4>[ 36.833953] [rtl8723au]: rtl8723au power state change: wifi 1, bt 0 !!
<6>[ 37.000734] usbcore: registered new interface driver rtl8723au
<6>[ 37.140696] init: computing context for service '/system/bin/logwrapper'
<5>[ 37.141027] init: starting 'p2p_supplicant'
<6>[ 37.145448] init: Created socket '/dev/socket/wpa_wlan0' with mode '660',
user '1010', group '1010'
<7>[ 37.783838] SELinux: initialized (dev mmcblk0p1, type vfat), uses
genfs_contexts
<3>[ 37.786341] init: no such service 'fuse_extsd'
<6>[ 37.976082] ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>[ 38.249726] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 39.319992] SELinux: initialized (dev nandj, type vfat), uses
genfs_contexts
<3>[ 39.322317] init: no such service 'fuse_sdcard'
<6>[ 39.767348] init: processing action 0x4ff40
(property:sys.boot_completed=1)
<6>[ 39.767609] init: computing context for service '/system/bin/busybox'
<5>[ 39.768012] init: starting 'preinstall'
<6>[ 39.768696] init: command 'start' r=0
<4>[ 39.775203] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
<4>[ 39.806003] [NAND]unknow cmd!
<4>[ 39.842073] RTL871X: start auth
<4>[ 39.844359] RTL871X: auth success, start assoc
<4>[ 39.848204] RTL871X: assoc success
<6>[ 39.848745] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 39.852335] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 39.852344] ==> rssi_level:0, rate_bitmap:0x000ff015
<3>[ 39.852679] init: sys_prop: permission denied uid:1003
name:service.bootanim.exit
<6>[ 39.943073] init: waitpid returned pid 1836, status = 00000000
<5>[ 39.943106] init: process 'bootanim', pid 1836 exited
<4>[ 39.982362] [ND]flush cache 145 0!
<4>[ 39.993627] [ND]flush cache 1 0!
<6>[ 40.095647] init: waitpid returned pid 2908, status = 0000ff00
<5>[ 40.095680] init: process 'preinstall', pid 2908 exited
<4>[ 40.248697] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 40.248706] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 40.267180] RTL871X: send eapol packet
<4>[ 40.273314] RTL871X: send eapol packet
<4>[ 40.273672] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2
AES-4) camid:4
<4>[ 40.275815] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2
AES-4) keyid:1
<6>[ 40.503005] init: computing context for service '/system/bin/dhcpcd'
<5>[ 40.503342] init: starting 'dhcpcd_wlan0'
<3>[ 45.684550] qtaguid: iface_stat: stat_update() wlan0 not found
<3>[ 45.887531] qtaguid: iface_stat: stat_update() wlan0 not found
<3>[ 46.192354] qtaguid: iface_stat: stat_update() wlan0 not found
<4>[ 49.619689] store maxPower "system_server" (pid 2138)
<4>[ 49.619728] store maxPower out
<4>[ 53.061701] [mmc]: * sw_mci_dump_errinfo(L559): smc 0 err, cmd 24, EBE
!!
<4>[ 53.061725] [mmc]: *
sw_mci_request_done(L612): In data write operation
<4>[ 53.061741] [mmc]: found data error, need to send stop command !!
<3>[ 53.061803] mmcblk0: timed out sending r/w cmd command, card status
0x400900
<3>[ 53.069640] mmcblk0: command error, retrying timeout
<3>[ 54.899215] qtaguid: iface_stat: stat_update() wlan0 not found
<4>[ 56.246824] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 56.246832] ==> rssi_level:1, rate_bitmap:0x000f0000
<3>[ 61.043744] qtaguid: iface_stat: stat_update() wlan0 not found
<3>[ 64.013336] qtaguid: iface_stat: stat_update() wlan0 not found
<4>[ 68.246322] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 68.246330] ==> rssi_level:2, rate_bitmap:0x000ff000
<3>[ 70.055353] qtaguid: iface_stat: stat_update() wlan0 not found
<6>[ 70.642052] init: waitpid returned pid 2978, status = 00000100
<5>[ 70.642083] init: process 'dhcpcd_wlan0', pid 2978 exited
<6>[ 70.955128] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 72.270076] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
<4>[ 72.304919] RTL871X: start auth
<4>[ 72.306589] RTL871X: auth success, start assoc
<4>[ 72.310438] RTL871X: assoc success
<4>[ 72.314083] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 72.314093] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 72.543437] RTL871X: send eapol packet
<4>[ 72.548721] RTL871X: send eapol packet
<4>[ 72.549018] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2
AES-4) camid:4
<4>[ 72.550568] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2
AES-4) keyid:1
<6>[ 72.758754] init: computing context for service '/system/bin/dhcpcd'
<5>[ 72.759045] init: starting 'dhcpcd_wlan0'
<4>[ 74.248232] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 74.248240] ==> rssi_level:1, rate_bitmap:0x000f0000
<4>[ 78.247969] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 78.247979] ==> rssi_level:2, rate_bitmap:0x000ff000
<3>[ 82.141608] qtaguid: iface_stat: stat_update() wlan0 not found
<5>[ 82.430982] type=1400 audit(1481987159.700:4): avc: denied { write } for
pid=4884 comm="DnsConfigServic" scontext=u:r:untrusted_app:s0
tcontext=u:r:untrusted_app:s0 tclass=netlink_route_socket
<3>[ 85.211550] qtaguid: iface_stat: stat_update() wlan0 not found
<4>[ 86.247834] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 86.247843] ==> rssi_level:1, rate_bitmap:0x000f0000
<5>[ 87.134027] type=1400 audit(1481987164.410:5): avc: denied { write } for
pid=5052 comm="su" name="server" dev="tmpfs" ino=3212
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=sock_file
<5>[ 87.168278] type=1400 audit(1481987164.440:6): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.168359] type=1400 audit(1481987164.440:7): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.172549] type=1400 audit(1481987164.450:8): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.172637] type=1400 audit(1481987164.450:9): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.189065] type=1400 audit(1481987164.460:10): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.189189] type=1400 audit(1481987164.460:11): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.197766] type=1400 audit(1481987164.470:12): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 87.197880] type=1400 audit(1481987164.470:13): avc: denied { sigchld }
for pid=5057 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<6>[ 89.205419] init: waitpid returned pid 5054, status = 00000000
<3>[ 89.205457] init: untracked pid 5054 exited
<6>[ 90.312844] init: waitpid returned pid 5201, status = 00000000
<3>[ 90.312879] init: untracked pid 5201 exited
<6>[ 90.318276] init: waitpid returned pid 5197, status = 00000000
<3>[ 90.318312] init: untracked pid 5197 exited
<6>[ 90.866568] binder: 2138:2721 transaction failed 29189, size 6436-0
<3>[ 91.253556] qtaguid: iface_stat: stat_update() wlan0 not found
<6>[ 94.406052] binder: 2138:2521 transaction failed 29189, size 276-0
<4>[ 95.778315] audit_printk_skb: 546 callbacks suppressed
<5>[ 95.778331] type=1400 audit(1481987173.050:196): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 95.778411] type=1400 audit(1481987173.050:197): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 95.780537] type=1400 audit(1481987173.050:198): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 95.780618] type=1400 audit(1481987173.050:199): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 95.785406] type=1400 audit(1481987173.060:200): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 95.785596] type=1400 audit(1481987173.060:201): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<3>[ 100.367596] qtaguid: iface_stat: stat_update() wlan0 not found
<6>[ 102.871927] init: waitpid returned pid 4236, status = 00000100
<5>[ 102.871959] init: process 'dhcpcd_wlan0', pid 4236 exited
<6>[ 103.243601] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 104.560073] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
<4>[ 104.665274] RTL871X: start auth
<4>[ 104.666927] RTL871X: auth success, start assoc
<4>[ 104.670734] RTL871X: assoc success
<4>[ 104.673075] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 104.673084] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 105.845244] RTL871X: send eapol packet
<4>[ 105.850557] RTL871X: send eapol packet
<4>[ 105.850867] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2
AES-4) camid:4
<4>[ 105.852439] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2
AES-4) keyid:1
<6>[ 106.062916] init: computing context for service '/system/bin/dhcpcd'
<5>[ 106.063250] init: starting 'dhcpcd_wlan0'
<4>[ 106.246947] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 106.246955] ==> rssi_level:2, rate_bitmap:0x000ff000
<3>[ 107.515041] qtaguid: iface_stat: stat_update() wlan0 not found
<3>[ 107.884191] qtaguid: iface_stat: stat_update() wlan0 not found
<6>[ 109.549158] binder: 2138:2150 transaction failed 29189, size 6436-0
<6>[ 110.086233] init: waitpid returned pid 5204, status = 00000000
<3>[ 110.086269] init: untracked pid 5204 exited
<6>[ 110.091444] init: waitpid returned pid 5058, status = 00000000
<3>[ 110.091474] init: untracked pid 5058 exited
<5>[ 110.129067] type=1400 audit(1481987187.400:202): avc: denied { sigchld }
for pid=5775 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<3>[ 112.451601] qtaguid: iface_stat: stat_update() wlan0 not found
<4>[ 114.247823] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 114.247833] ==> rssi_level:1, rate_bitmap:0x000f0000
<3>[ 114.964273] qtaguid: iface_stat: stat_update() wlan0 not found
<3>[ 118.493604] qtaguid: iface_stat: stat_update() wlan0 not found
<3>[ 119.212197] qtaguid: iface_stat: stat_update() wlan0 not found
<6>[ 122.491837] qtaguid: ctrl_untag(u -1): failed to lookup sock_fd=-1 err=-9
pid=6505 tgid=6448 uid=10078
<6>[ 122.513724] sun6i-rtc sun6i-rtc: set time 2016-12-17 15:6:38
<5>[ 122.912796] type=1400 audit(1481987199.244:203): avc: denied { search }
for pid=6446 comm="Binder_2" name="1312" dev="proc" ino=3177
scontext=u:r:untrusted_app:s0 tcontext=u:r:zygote:s0 tclass=dir
<5>[ 122.912888] type=1400 audit(1481987199.244:204): avc: denied { read }
for pid=6446 comm="Binder_2" name="stat" dev="proc" ino=3553
scontext=u:r:untrusted_app:s0 tcontext=u:r:zygote:s0 tclass=file
<5>[ 122.912947] type=1400 audit(1481987199.244:205): avc: denied { open }
for pid=6446 comm="Binder_2" name="stat" dev="proc" ino=3553
scontext=u:r:untrusted_app:s0 tcontext=u:r:zygote:s0 tclass=file
<5>[ 122.946940] type=1400 audit(1481987199.274:206): avc: denied { read }
for pid=6446 comm="Binder_2" name="/" dev="tmpfs" ino=4472
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir
<5>[ 122.947017] type=1400 audit(1481987199.274:207): avc: denied { open }
for pid=6446 comm="Binder_2" name="/" dev="tmpfs" ino=4472
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir
<5>[ 123.003421] type=1400 audit(1481987199.334:208): avc: denied { read }
for pid=6446 comm="Binder_2" name="socket" dev="tmpfs" ino=4474
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:socket_device:s0 tclass=dir
<5>[ 123.003497] type=1400 audit(1481987199.334:209): avc: denied { open }
for pid=6446 comm="Binder_2" name="socket" dev="tmpfs" ino=4474
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:socket_device:s0 tclass=dir
<5>[ 123.298979] type=1400 audit(1481987199.624:210): avc: denied { write }
for pid=6620 comm="DnsConfigServic" scontext=u:r:untrusted_app:s0
tcontext=u:r:untrusted_app:s0 tclass=netlink_route_socket
<6>[ 124.488198] qtaguid: ctrl_untag(u -1): failed to lookup sock_fd=-1 err=-9
pid=6539 tgid=6448 uid=10078
<5>[ 124.870792] type=1400 audit(1481987201.194:211): avc: denied { search }
for pid=6446 comm="Binder_2" name="/" dev="selinuxfs" ino=1
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:selinuxfs:s0 tclass=dir
<4>[ 128.249067] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 128.249076] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 130.247073] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 130.247081] ==> rssi_level:1, rate_bitmap:0x000f0000
<4>[ 134.247696] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 134.247705] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 138.799646] audit_printk_skb: 6 callbacks suppressed
<5>[ 138.799666] type=1400 audit(1481987215.124:214): avc: denied { write }
for pid=7276 comm="su" name="server" dev="tmpfs" ino=3212
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=sock_file
<5>[ 138.814137] type=1400 audit(1481987215.144:215): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.814219] type=1400 audit(1481987215.144:216): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.816296] type=1400 audit(1481987215.144:217): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.816378] type=1400 audit(1481987215.144:218): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.833216] type=1400 audit(1481987215.164:219): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.833344] type=1400 audit(1481987215.164:220): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.841465] type=1400 audit(1481987215.164:221): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.841575] type=1400 audit(1481987215.174:222): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 138.851079] type=1400 audit(1481987215.174:223): avc: denied { sigchld }
for pid=7281 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<6>[ 140.723712] init: waitpid returned pid 7282, status = 00000000
<3>[ 140.723748] init: untracked pid 7282 exited
<6>[ 140.728556] init: waitpid returned pid 7279, status = 00000000
<3>[ 140.728583] init: untracked pid 7279 exited
<6>[ 151.093551] healthd: battery l=61 v=3692 t=30.0 h=2 st=3 c=845 chg=
<4>[ 162.441056] audit_printk_skb: 582 callbacks suppressed
<5>[ 162.441073] type=1400 audit(1481987238.764:418): avc: denied { write }
for pid=7881 comm="su" name="server" dev="tmpfs" ino=3212
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=sock_file
<5>[ 166.937542] type=1400 audit(1481987243.264:419): avc: denied { sigchld }
for pid=7885 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 166.937593] type=1400 audit(1481987243.264:420): avc: denied { sigchld }
for pid=7885 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 166.937767] type=1400 audit(1481987243.264:421): avc: denied { sigchld }
for pid=7885 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 166.937808] type=1400 audit(1481987243.264:422): avc: denied { sigchld }
for pid=7885 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<6>[ 166.939016] init: waitpid returned pid 7887, status = 00000000
<3>[ 166.939049] init: untracked pid 7887 exited
<6>[ 166.943910] init: waitpid returned pid 7883, status = 00000000
<3>[ 166.943940] init: untracked pid 7883 exited
<6>[ 167.923361] init: waitpid returned pid 8003, status = 00000000
<3>[ 167.923394] init: untracked pid 8003 exited
<5>[ 176.856103] type=1400 audit(1481987253.184:423): avc: denied { sigchld }
for pid=8263 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 200.553251] type=1400 audit(1481987276.884:424): avc: denied { sigchld }
for pid=8263 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 200.553449] type=1400 audit(1481987276.884:425): avc: denied { sigchld }
for pid=8263 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<6>[ 200.653005] init: waitpid returned pid 8264, status = 00000000
<3>[ 200.653040] init: untracked pid 8264 exited
<6>[ 200.658020] init: waitpid returned pid 8261, status = 00000000
<3>[ 200.658052] init: untracked pid 8261 exited
<6>[ 200.663378] init: waitpid returned pid 8258, status = 00000000
<3>[ 200.663432] init: untracked pid 8258 exited
<4>[ 204.246823] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 204.246831] ==> rssi_level:1, rate_bitmap:0x000f0000
<4>[ 205.535993] Pulse: "android.ui" (pid 2193)
<4>[ 205.536023] Pulse out
<5>[ 219.728290] type=1400 audit(1481987296.054:426): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 219.728395] type=1400 audit(1481987296.054:427): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 219.965243] type=1400 audit(1481987296.294:428): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 219.965334] type=1400 audit(1481987296.294:429): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 220.155124] type=1400 audit(1481987296.484:430): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 220.155219] type=1400 audit(1481987296.484:431): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<5>[ 220.271149] type=1400 audit(1481987296.594:432): avc: denied { sigchld }
for pid=9106 comm="sh" scontext=u:r:zygote:s0 tcontext=u:r:init_shell:s0
tclass=process
<4>[ 230.247703] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 230.247711] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 236.246825] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 236.246834] ==> rssi_level:1, rate_bitmap:0x000f0000
<4>[ 254.246832] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 254.246841] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 272.247831] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x0b,
mask:0x000fffff
<4>[ 272.247839] ==> rssi_level:1, rate_bitmap:0x000f0000
<5>[ 277.227002] type=1400 audit(1481987353.554:433): avc: denied { write }
for pid=11135 comm="su" name="server" dev="tmpfs" ino=3212
scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=sock_file

Antworten
Erwin W.
  • Forum-Beiträge: 35.443

17.12.2016, 16:44:33 via App

wer soll das denn alles lesen :-? :-D

— geändert am 17.12.2016, 16:44:56

L.G. Erwin
..................
Wissen ist Macht. Nichts wissen macht nichts.
Wer einen Rechtschreibfehler findet darf ihn behalten.
Am Ende wird alles gut. Und wenn es nicht gut ist, ist es nicht das Ende.
Hat dir mein Beitrag gefallen? Dann würde ich mich über ein Danke freuen.
(cool)

Antworten
Hans Klawun
  • Forum-Beiträge: 23

17.12.2016, 17:12:51 via Website

Ich hätte gerne das wichtige kopiert, wenn ich wüsste was wichtig ist:'(
Habe mir extra ein Android Handbuch für die Systemkonfiguration besorgt aber das sind ja auch erst mal ca. 250 Seiten wo ich etwas nachlesen kann......glaube aber, das es nicht das Richtige ist wenn ich mir mal den Überblick ansehe.
Aber mit etwas muss ich ja anfangen.

Antworten
Müli
  • Forum-Beiträge: 6.959

18.12.2016, 00:29:04 via Website

Haakon T.

Du schriebst ja "einen 4Gb DDR3 Chip 256x8 1333". Da es derer zwei sind hat das Gerät also die 1GB, das ist der Hauptspeicher des Gerätes, abzüglich reservierter Videospeicher und etwas Kleinkram.

Meine Schulzeit liegt zwar schon etliche Jahrzehnte zurück aber bei mir sind 256Mx8bit (2Mb, 2 Mega bit ) also 256MB (Mega Bytes) und bei zwei dieser Chips sind es zusammen 512MB!

AIDA64 zeigt den tatsächlich verbauten Speicher (RAM) an .....

Mein Mainframe -> HP16C
Samsung Galaxy S23Ultra 512GB Edition
Troubleshooting-Probleme? -> Kepner Tregoe!

Antworten
Hans Klawun
  • Forum-Beiträge: 23

18.12.2016, 07:00:29 via Website

Ich bin ja auch der Meinung, das es nur 512 MB sind aber AIDA64 zeigt 768 MB an.
Ich kenne kein Smatphone oder Tablet, welches 768 MB verbaut hat. Entweder 512 oder 1024 usw. aber nicht so etwas wie mittendrin.
Daher meine Vermutung, das es "virtuellen" Ram zusätzlich gibt.
Um zu meiner Eingangsfrage zu kommen, wo kann ich das ändern oder erkennen ?
Mit dem Kernel-Log kann ich bis auf einige Sachen noch nichts anfangen.
Leider finde ich immer nur Seiten auf englisch oder in einer anderen Sprache wo nach dem Übersetzen nur Kauderwelsch rauskommt..

Wiki erklärt zwar was,was ist aber ohne für mich brauchbare Beispiele.

Hans

Antworten
Müli
  • Forum-Beiträge: 6.959

18.12.2016, 09:20:11 via Website

Hans Klawun

Daher meine Vermutung, das es "virtuellen" Ram zusätzlich gibt.

Virtueller Speicher wird unter Linux und Android gehört zu den Linux Derivaten, in Form einer Partition realisiert. Diese Swap Partition müsstest du unter den Laufwerken (Partitionen) finden. Diese würde man aber, wenn man sie schon einrichtet, gleich größer anlegen.

Leider finde ich immer nur Seiten auf englisch oder in einer anderen Sprache wo nach dem Übersetzen nur Kauderwelsch rauskommt..

Die Sprache in der IT-Welt ist nun mal Englisch, die besten Anleitungen findet man ohnehin nur in dieser Sprache.

Mein Mainframe -> HP16C
Samsung Galaxy S23Ultra 512GB Edition
Troubleshooting-Probleme? -> Kepner Tregoe!

Antworten