Samsung Galaxy S4 — Knox richtig Löschen S4 9506 (4.2.2) : Kann mir jemand die Anleitung von XDA übersetzen oder gibt es diese schon in Deutsch irgendwo.

Hallo,

habe bei XDA eine Anleitung zum endgültigen löschen von Knox gefunden, aber da mein Englisch nicht ausreichend ist und ich mein Handy ungern bricken möchte, hätte ich die Bitte, das mir jemand diese Anleitung unmissverständlich übersetzt, das wäre sicher auch für andere User hilfreich...

DANKE !!!

Mein Handy:
S4 5906
gerootet
Original Stock Rom 4.2.2
TWR

Hier der Original Text, Zitat aus forum.xda-developers(punkt)com/showthread.php?t=2597058

Remove all KNOX from your GT-I9506 phone. This is for both 4.2.2 and
4.3 users running Samsung original.

Did you just purchase a GT-I9506, hoping it was running Android 4.2.2
without the Samsung KNOX...just to find out it was already updated to
Android 4.3 with all the nice KNOX functions activated? Or did you, by
accident, accept an update from Samsung and suddenly KNOX was
activated in there? Well, It doesn't matter how KNOX got into your
phone, what really matters is how to get rid of it again. I'm now able
to offer a method, which will completely remove all KNOX and others of
its security related functions from your phone, running on Samsung
original 4.3 firmware. This made possible after spending 6 hours
on-line with xda-member Toutatibal, who made all the test flashings.
He was running Samsung original 4.3 with ALL it's KNOX functions
activated and wanted to get it all out of his phone. He was also fully
aware of the consequences regarding the KNOX warranty. Because this
WILL trigger the KNOX bit found in Download mode, which will then look
this:

Current Binary: Custom System Status: official Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1 Qualcom Secure Boot: ENABLE RP SWREV: S1, T1,
A1, A1, P1 Write Protection: ENABLE

The above only applies to 4.3 bootloaders. On the 4.2.2 bootloader
nothing happens. No KNOX will be tripped.

WARNINGS! Do NOT try this if you use your phone as a business/work
phone, which requires KNOX to be in there! Do NOT try to flash
anything else that the files mentioned here! - Believe me, we HAVE
tried...

NOTES! Consider this as an update, because it's definitely NOT a
downgrade to become KNOX free.

What you need, is to get the file below here, KNOX OUT. It contains
almost the same insecure kernel and system as we used to upgrade from
4.2.2 to 4.3 without having to flash the complete upgrade package and get the KNOX. It has now proven to be useful on Samsung original 4.3
too, since it's same files we're dealing with. Furthermore you will
need the correct CSC/Hidden package for your region, important. These
can be found further down, below the KNOX OUT file. We found out, that
just flashing the CSC files isn't enough, it requires the whole
package to work. Don't ask me why, I haven't the slightest idea...it
worked with CSC only when going from 4.2.2 to 4.3. During the work on
the French phone, xda-member Toutatiball and I tried everything and we
couldn't get it to work...until he tried the combined CSC/Hidden
package. I also recommend you to have the original Samsung 4.3 image
file for your region/provider available, if something should go
wrong... As I wrote in a post, we were NOT able to get it working
until Toutatibal flashed his own French original 4.3 firmware. Even
with the original 4.3 Nordic Open it didn't work, strange - since this
was the firmware he was using before without any problems.

So as you can see, it doesn't require much to get KNOX free, it just
requires to done the in a special way. So due to the problems we had
on the French phone, I do recommend you to flash your OWN original 4.3
region/provider firmware first. This to avoid any problems that might
or could turn up. If you're already on the correct firmware, continue
reading. If you're using any kind of Custom Recovery, flash your OWN
original 4.3 region/carrier firmware first.

Since this image contains an insecure kernel, your phone will show a
little red warning at the top of the boot screen whenever the phone is
reset, powered on or placed on charge in OFF mode. This is only an
information and doesn't mean anything!

Are you ready now?

OK lets do it and get KNOX free. It's VERY important that you
carefully follow these steps one by one and don't forget anything! If
you fail, the whole process might fail and you will then have to flash
the original 4.3 firmware and start all over again.

Fire up Odin on your PC.

Select PDA and selcet the unzipped file you just downloaded.

Make sure Auto Reboot square is unmarked.

Put your phone in Download mode.

Connect phone to PC and wait for Odin recognize it.

Press Start...and wait for Odin to do it's flashing.

You can see when Odin has finished its job by reading the text
messages. Now remove phone from PC.

Now you must go DIRECTLY to DOWNLOAD mode again.

In Odin, press Reset and the old text will disappear.

Now press PDA again and select the unzipped CSC/Hidden file for your
region you have just downloaded.

Make sure Auto Reboot square is unmarked. (This will be auto marked
when you press Reset.)

Connect phone to PC and wait for Odin recognize it.

Press Start...and wait for Odin to do it's flashing.

You can see when Odin has finished its job by reading the text
messages. Now remove phone from PC.

Now you MUST go directly to RECOVERY MODE - IMPORTANT!

While in recovery mode, phone now installs the CSC and hidden files
and should then reboot.

If everything went out as expected, you should now after a couple of
minutes be presented with the set-up screen. Congratulations; your
phone is now 100% KNOX free, it's rooted, De-Odexed/Zip-aligned and
support init.d scripts. You can now remove the carrier bloatware you
want.

Please report problems and suggestions in the thread.

Ivory Balboa

Und was hast du dann davon?

Was hat das mit meiner Frage zu tun?
Und würdest Du Dir die Mühe machen und selbst in Google suchen, wüsstest Du warum